The TC name describes the special Twin Chamber design of the bubble chamber which is patented and has the benefit of pressurizing the pumps for higher performance and ensures that only unskimmed water passes through the pump rather than reskimming and reprocessing water in the chamber.
The new bubble plate design allows the height of the skimmers to be reduced compared with the current range to allow them to fit in a greater number of installations and cabinets. The primary use of the bubble chamber is to prevent turbulence from the skimmer body and neck as turbulence can pull waste loaded bubbles back into the water column causing a reduction in efficiency.
The air to water ratio is so high that there is almost immediate reaction with the waste therefore there is no requirement for the tall reaction chambers found on some low air skimmers thus keeping the units compact.
|Watts||19 - 22||29 - 34||29 - 34||29 - 34|
|Total Air Produced||1100 - 1300 L / H||1500 - 1800 L / H||2x 1500 - 1700 L / H||2x 2100 L / H|
|Flow Rate||1400 - 2500 L / H||2000 - 3600 L / H||2200 - 3600 L / H||2200 - 3600 L / H|
|Diam. x Height (mm)||200 x 600||250 x 600||300 x 700||300 x 700|
|Height Under Outlet Pipe||11.1"||10.5"||10.4"||10.4"|
|Neck Diameter||7.9"||140 mm||160 mm||8"|
|Footprint||11 x 13"||12.6 x 17"||12.6 x 17.7"||15 x 17.7"|
|Inlet / Outlet||1 / 1.5"||32 x 50 mm||32 x 50 mm||1 x 1.5"|
|Tank Suitability Heavy Stocking||370 USG||635 USG||1055 USG||1585 USG|
|Tank Suitability Normal Stocking||450 USG||530 USG||1270 USG||2110 USG|