- Saltwater
- Additives & Treatments
- Aquariums
- Auto Top Off Equipment
- Chillers & Cooling Fans
- Cleaning & Maintenance
- Controllers & Monitors
- Dosing Pumps
- Filter Media
- Food, Supplements & Vitamins
- Fragging Tools
- Gift Cards
- Heaters
- Hydrometers & Refractometers
- Lighting
- Light Bulbs
- Media Reactors
- Medicine & Traps
- Overflow Boxes
- Plumbing Parts
- Protein Skimmers
- Pumps & Powerheads
- RO/DI Water Filters
- Salt
- Sand & Reef Rock
- Sumps
- Test Kits & Tools
- Thermometers
- UV Sterilizers & Bulbs
- Wavemakers
- Freshwater
- Air Pumps & Accessories
- Air Stones & Wands
- Backgrounds
- Books
- Chillers
- Cleaning & Maintenance
- Decorations
- Dosing Equipment
- Feeders
- Filters
- Filter Cartridges
- Filter Media
- Fish Bowls & Betta Kits
- Food
- Gift Card
- Gravel & Substrates
- Heaters, Meters & Gauges
- Light Bulbs
- Light Fixtures
- Medications & Remedies
- Plant Supplements
- Pumps & Powerheads
- RO/DI Water Filters
- Sealants & Epoxy
- Test Kits - Freshwater
- UV Sterilizers & Bulbs
- Water Care & Conditioners
- Pond
- My Account
- Continue Shopping
- Your Cart is Empty
Tunze
No sales gimmicks. Low prices every day. Compare us to Petco and Amazon.
Tunze Care Magnet Algae Cleaner
$ 19.56
The "Care Magnet" is a breath of fresh air in the field of aquarium pane cleaner design, consisting of an ergonomic handle and special plastic blades made of wear-resistant high performance plastic. The patented slim Care Magnet is significantly more compact than conventional algae magnets with a large cleaning surface, it is unobtrusive and therefore able to remain within the aquarium without disrupting the overall scenery.
Why care? This glass pane cleaner avoids scratches on internal aquarium glass panes, and can therefore even be used on acrylic glass panes with the small plastic blade.
The inner magnet is more than 3mm away from the aquarium and thus prevents the jamming of the aquarium sand. The two plastic blades remove the algae considerably better from the glass panes than a flat cleaning surface - almost as good as a sharp metal blade. The life of a blade is from several months up to approx. one year. The low flow resistance during the cleaning with a simultaneous high magnetic coupling, makes a separation of the magnet nearly impossible.
The large blade should only be modified with the included stainless steel blade for aquarium glass panes with particularly tough algae, e.g. older deposits on the side walls or thick calcareous algae.
Download the manufacturer manual .PDF
specs
| Size | Dimensions | Suitable Glass Thickness |
| Nano | 1.77in x 3in | 6mm to 10mm |
| Long | 3.4in x 5.5in | 10mm x 15mm |
| Strong | 3.4in x 5.5in | 15mm to 20mm |
Tunze Comline Wavebox 6208
$ 331.99
The Comline® Wavebox 6208 includes everything required to generate waves in small to medium rectangular aquariums from 35 to 210 gallons. The new Comline® is easy to use, elegant and small. The Comline® Wavebox 6208 uses an original Turbelle® nanostream® pump and its very compact dimensions enable hidden installation in aquariums. The produced wave flow is a useful supplement to directional current for suspending detirtus and the de-sedimentation of the aquarium. It also transports oxygen and nutrients to areas otherwise not reached by conventional circulation pumps. The integrated Magnet Holder enables easy attachment anywhere in the aquarium up to a glass thickness of 1/2". Package includes Tunze Wavecontroller 7092 and photocell.
Features
- Oscillating current with near-nature wave movement and circulation.
- De-sedimentation of the entire aquarium habitat.
- Wave generation at low power consumption, high efficiency and low motor heat.
- Safety extra-low voltage, blocking and run-dry protection.
Specifications
- For tank sizes from 35 to 210 gallons
- Dimensions: L 4.3" x W 3.5" x H 10"
- Immersion depth: approx. 9.1"
- Power Consumption average: 10W
- Included Jumper: 20V (other voltage jumpers available directly through Tunze)
- Magnet Holder up to glass thickness of 1/2"
- Made in German with a 2-year manufacturer's warranty
Tunze Multicontroller 7095
$ 269.99
Main Features
- Wave simulation function
- Tidal current control
- Night mode operation including photoelectric cell
- Sequential pump circuit
- Random flow
- Foodtimer
- Control up to 4 of the controllable Tunze Nanostream or Stream 2 powerheads individually.
- Use a Y adapter (7092.34) to control up to 8 controllable Tunze powerheads in pairs.
- Waterproof membrane keypad on new housing
- LED moonlight with 29-day moon phase including universal mount
- Display of the capacity of the pump connected
Tunze Multicontroller 7095 is a digital control unit for all controllable Tunze Nanostream and Stream powerheads. It allows you to simulate various marine current conditions in the aquarium. Multicontroller 7095 can control up to eight controllable Tunze powerheads, and contains an LED moonlight with a 29-day moon phase. A wavebox 6212 can also be controlled by the Multicontroller. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 percent.
Includes four connecting cables 7092.30 and a photo-electric cell, permitting a near-natural current control with up to four Tunze controllable powerheads. Use the Y adapter 7092.34 (purchased separately) to connect up to eight Tunze controllable powerheads which are controlled in pairs. Two interval functions for tidal current control with alternating on/off switch function of the pumps or alternating operation of pump capacity.
Tunze Multicontroller 7096
$ 168.99
TUNZE® Multicontroller 7096 is a control device for all Turbelle® and Stream® pumps fitted with an electronic motor, which can be adjusted by computer when attached by USB cable.
It features a 8-Bit high-performance microprocessor with memory maintaining the settings in the case of a power failure. When selecting the settings on the controller from a computer, the Multicontroller does not have to be connected to the pumps. Upon completion and saving of the set-up on the computer, the data will also be saved in the Multicontroller.
The TUNZE® Multicontroller 7096 features the functions of Multicontroller 7095 and Wavecontroller 7092 as well as some new control options. It simulates the different ocean current conditions in the aquarium and features a bright LED moonlight.
Includes:
7096 Multicontroller with photo-electric cell, moonlight, and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. Suitable for MS-Windows 98, 2000, XP and Vista.
Download the manufacturer instructions .PDF
modes
Pulse Mode Wave Simulation:
Set maximum and minimum velocities as well as pulse duration. Creates natural alternating currents ideal for smaller aquariums with only one controllable pump. Two pumps can be set to pulse together or in inverse mode.
Interval Mode Tide Simulation:
Generally best mode for two pumps on opposite sides of the aquarium. As one pump pulses between two set powers, other stays on low speed. The pumps then swap roles based on setting, from minutes up to hours. Also useful for creating gyro currents.
Sequential Mode Surges and Swelling Currents:
Used with three or more pumps, generally in larger tanks. Pumps are triggered cumulatively. Pump one begins, then Pump two is added to that, then Pump three is added together with One and Two and so forth. Timings set by user.
Random Flow
Combination of Pulse Mode and Sequential Mode.
Oscillating Mode
Pump channels can be used as Wave Controller with automatic search of resonance frequency. Oscillating mode switches between Pulse Mode pumps and Waveboxes.
Food Timer
Allow all pups to be stopped at the push of button. Pumps restarts automatically after a period of roughly ten minutes (or adjustable time period on 7096). During food timer operation, all pumps twitch periodically to keep small fish from entering pumps.
Moonlight with Moon Phase Simulation
Natural, soft white moonlight with 29-Day cycle of waxing and waning. Can be synchronized with actual moon phases.
Night Mode Operation
Option to have pumps and Waveboxes run at lowest speed automatically whenever main aquarium lights are off. Triggered by photocell built into moonlight.
Storm Desedimentation
Can be set to run at intervals of hours to days. Runs pumps in short, aggressive mode to stir any settled detritus.
Tunze Nano Wavebox 6206
$ 334.99
TUNZE® Nano Wavebox and Wavebox are suitable wave generators for all reef biotopes. They produce oscillating waves which produce water movement almost identical to reef zones. Nano Wavebox and Wavebox are controlled by means of Wavecontroller 6091, which utilizes the principal of resonance frequency to create wave motion. The resonance frequency is set on the Wavecontroller; it is the frequency, at which the waves can reach the maximum height in the aquarium. At very little power consumption, an enormous water movement is produced very efficiently. All of the water in the tank is in movement, which means that water also laps around areas behind stones. In large tanks, a Wavebox 6212 and a Wavebox Extension 6212.50 should be fitted, the latter being a Wavebox 6212 without Wavecontroller 6091 which is used as an extension. Nano Wavebox and Wavebox can be fitted in any corner of the aquarium.
A special Wavebox pump is used as a wave generating pump, which belongs to the family of the Turbelle ® stream pumps. It pumps the water out of the box at a high speed. The Wavecontroller 6091 stops the pump after a short time; the water returns into the housing of the Wavebox.
The Wavecontroller 6091 controls the pump in such a way that switching on and off corresponds to a certain frequency. The frequency is determined when the unit is set up, which then remains constant. Given a strong growth of coral, this frequency should be re-adjusted after some time. In order to ensure night-mode operation, the Wavecontroller 6091 has been fitted with a photoelectric cell: In this case the Wavebox will be set to standstill for the night. The Foodtimer integrated in the Wavecontroller switches the Wavebox off when food is dispensed. The wave generation is interrupted for about 7 to 9 minutes to permit feeding. The break in wave movement whilst the fish are fed ensures that no food gets into the stone structures and that the fish can feed undisturbed by the wave movement.
- Dimensions: L 125 x W 55 x H 220 mm (L 4.9 x W 2.1 x H 8.6 in.).
- Immersion depth: approx. 180 mm (7.0 in.), on average 10 W, 230 V / 50 - 60 Hz (115 V / 50 - 60 Hz).
- For tanks from 150 to 600 litres (39 to 158 USgal.)
Tunze Osmolator Nano 3152
$ 106.99
Water level controller with only one sensor for nano aquariums or small aquariums with up to 200 liters (55 US gal.). Can be installed in a cabinet filter or directly on the aquarium edge. Scope of delivery: ready for installation with 11V power supply, low-voltage metering pump, 3m (118 inch) hose, magnet holder for up to 10mm (3/8") glass thickness and a protective cover for the sensor.
Tunze Osmolator Universal 3155
Sold Out - $ 205.99
The Tunze 3155 Osmolater is a universal Auto Top Off unit. The Osmolater uses an electronic eye to maintain water levels which has no moving parts so it's not susceptible to getting stuck on or off due to salt creep like float valves are. *New* Convenient magnet holder for easily low profile attachment of probes.
Tunze Replacement 45mm Plastic Blades for Care Magnet Algae Cleaner - 2pk
$ 5.42
Replacement 45mm plastic blades for Tunze Care Magnet Nano, package of 2.
Tunze Replacement Blade Set for Care Magnet Algae Cleaner Long/Strong
$ 7.31
Replacement 86mm blade set for or Tunze Care Magnet (Strong/Long).
Tunze Switched Socket Outlet for Osmolator Auto Top-Off System
$ 70.12
The Osmolator®, included low-voltage centrifugal pump can be replaced by this Tunze Switched Socket Outlet in combination with a more powerful pump. The switched socket outlet can be used to switch metering pumps with a maximum of 900W, such as Turbelle® e-jet 805, 1205, Silence 1073.02, 1073.04 or a peristaltic pump.
*Please note that the pump power on the Osmolator must be set to max on the controller when the switched socket is used.
Tunze Turbelle NanoStream (non-controllable)
$ 38.99
Non-controllable synchronous motor pumps.
specs
Tunze Turbelle Stream 2 Powerhead
$ 36.69
Eco-Energetic
The innovative motor based on the eco-energetic concept and the newly developed pump technology ensures a very high efficiency at very low maintenance and power consumption.
Very Silent Run
Special plastic bearings, a New Generation with Titanium Alloy Shaft, and silicone absorbers enable a very silent run without wear which applies for smaller models as well as for the more powerful pumps.
Large Suction Area
The water which is drawn in passed through a giant intake strainer, and thus prevents premature soiling.
Magnet Holder - A Standard Feature
As a standard feature, Turbelle stream is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.
- NanoStream 6025 & 6045 pumps include a magnet holder for aquariums up to 1/2" thick.
- Turbelle Stream models 6065, 6085, & 6125 include a magnet holder for aquariums up to 3/4" thick.
Flexible adaptation
The ball-type design is an intelligent solution for installation with a minimum of hydraulic losses. Contrary to other pumps, they offer a lot of flexibility with respect to positioning and orientation of the water beam, which can be adjusted in such a way that an effective flow is produced over a long distance in the aquarium at lower power consumption.
Energy efficient
Eco-energetic and extremely silent Hardly any other components have experienced similar progress in aquarium engineering in the past few years as the circulation pump. The new Turbelle® stream 2 is a very compact screw pump with a wellthought- out design used to circulate water in aquariums or tanks. It contains several innovative technical solutions and adapts to the aquarium without affecting the existing biotope.
Models 6025, 6045, 6065, 6085, & 6125 are not controllable.
specs
| Model # | Watts | Dimensions |
| NanoStream 6015 | 6 | Diameter 2.7"/ Outlet 1.5" |
| NanoStream 6025 | 6 | Diameter 2.7"/ Outlet 1.5" |
| NanoStream 6045 | 7 | Diameter 2.7"/ Outlet 1.5" |
| Turbelle Stream 6065 | 12 | Diameter 3.5"/ Outlet 1.96" |
| Turbelle Stream 6085 | 14 | Diameter 3.5"/ Outlet 1.96" |
| Turbelle Stream 6125 | 24 | Diameter 3.5"/ Outlet 2.48" |
flow chart
| Model # | Flow rate | Tank size |
| NanoStream 6015 | 475 gph | 5 - 30 gal |
| NanoStream 6025 | 660 gph | 10 - 50 gal |
| NanoStream 6045 | 1189 gph | 25 - 50 gal |
| Turbelle Stream 6065 | 1717 gph | 65 - 200 gal |
| Turbelle Stream 6085 | 2113 gph | 105 - 260 gal |
| Turbelle Stream 6125 | 3170 gph | 105 - 500 gal |
Tunze Wavebox 6215
$ 581.99
Tunze Wavebox 6215 is a wave generator for aquariums from 52-317gal (200-1200L). It is specially suitable for reef biotopes as it generates an oscillating current. The current corresponds exactly to the wave structure and water movement in reef top zones. The Wavebox applies this oscillating principle through Wave Controller 6091, which uses the intrinsic resonance of the tank. A very low power consumption generates ideal water movement. The water is in movement in all areas of the aquarium, even the smallest section behind a decoration benefits from the wash. Magnetic holders now make the Tunze 6215 even more stable in your aquarium
NOTE: Products are sold in 110V conversions. Please verify your country’s volt conversion before making any electrical purchase.
Tunze Wavebox Extension 6215.50
$ 518.99
Designed for aquariums with volumes of over 1,500 litres (400 US gal.), the Wavebox Extension 6215.50 should be added to the existing Wavebox. The Wavebox extension contains the Wavebox 6215, however without Wavecontroller. The combination of Wavebox and Wavebox Extension is suitable for aquariums up to about 3,000 litres (about 800 USgal.). Each additional extension (three maximum) increases the volume recommended by about 1,500 litres (about 400 US gal.). The Waveboxes can be placed beside each other or opposite each other, and a Wavebox Extension 6215.50 can be connected to Wavebox 6215 without any additional accessories. A Y adapter 7092.34 is needed only if two or three Wavebox extensions are being used.
Additionally, for customers who already own a 7092 or 7096 controller, you may connect the Wavebox Extension 6215.500 directly to your existing controller set to Wavemode.
Specifications:
- Dimensions: L 4.9 x W 4.4 x H 11.8 in.
- Immersion depth: approx. 11.0 in.
- Power Consumption: on average 18 W at 18 V, 26 W at 24 V
- Magnet Holder up to a glass thickness of 0.74"
- Made in Germany with 2 year manufacturer's warranty
Tunze Wavecontroller 7092
$ 76.49
Wavecontroller 7092 fitted with a membrane terminal is a control unit to be used on all Turbelle® pumps with electronic motor, and can synchronously or alternately control two Turbelle® pumps:
- Wave simulation by setting the two pump outputs to maximum and minimum values as well as the pulse time.
- Oscillating flow for the direct or reciprocal operation of the Wavebox.
- Oscillating flow with Turbelle® pump for the operation of Turbelle® stream pumps.
- Automatic search of the resonance frequency in case of oscillating flow.
- Ramp function for a gentle start of the pumps.
- Foodtimer at the touch of a button; after about eight to ten minutes, a restart is carried out automatically. If the Photo-Electric Cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.