No sales gimmicks. Low prices every day. Compare us to Petco and Amazon.
$ 33.99
Cobalt Aquatics MJ Pumps
The Original MJ multi-use submersible pump and power head is built to perform and last under the harshest conditions. Ideal for wave makers, protein skimmers, calcium reactors, nano aquariums, under gravel filters and hydroponic applications.
Includes:
SPECIAL NOTE for REACTOR users:
The MJ pump is the perfect pump for use with reactors on reef aquariums. One thing to understand is that reef aquariums have high levels of calcium, in fact at almost saturation levels, and areas with slightly higher temperatures can have active and dramatic precipitation of calcium on parts, ie impellers and impeller shafts.
In as little as 4-5 months, calcium can build up enough to stop an MJ pump. Calcium build up is NOT covered by the warranty, but is easily kept in check with routine maintenance.
Every 2-3 months, take out the MJ and remove the impeller, soak in distilled vinegar for 15-20 mins, then scrub parts with an old toothbrush and work the impeller up and down shaft to break up and mineral deposits. Rinse with fresh water and re-install impeller and MJ into system.
This simple maintenance will keep your MJ running like new for years.
$ 30.45
EcoTech Vectra Battery Backup Booster
The Ecotech Marine Vectra Battery Backup Booster will plug in directly between the controller on the Vectra series of pumps and the battery backup allowing your aquarium system to have flow in the event of a power outage. Connects in seconds Essential in case of a power outage, Auto On/Off mode conserves battery
$ 299.99
World's Smartest Return Pump
EcoTech Marine Vectra Centrifugal Pump is the perfect centrifugal pump for return or closed loop applications from 1400 gph (S2 model), 2000 gph (M2 model) or 3100 gph (L2 model).
Flexible Installation
Included with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup.
Return Pump or Closed Loop
The Vectra can be installed and operated as either a return pump or as closed loop flow pump.
Inline or Submersible
Vectra pumps feature a sealed motor and magnetic drive for internal and external operation as a return pump for Closed Loop flow. The Vectra‰۪s flexibility will fit your needs for just about any setup that you wish to achieve.
Vectra Driver
The Vectra driver features EcoTech‰۪s QuietDrive technology.
EcoSmart Live Compatible
EcoSmart Live is EcoTech Marine‰۪s web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and Radion LED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger.
Get real time information about your lighting and pumps or wirelessly update your product‰۪s firmware. Having issues getting the coral growth that you expect? Our award winning customer service staff can log into your account and suggest changes for you.
Battery Backup Compatible
In an aquarium with no flow, fish and corals begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing.
By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants.
The Vectra Advantage
Traditional AC pumps when used as a return pump for your sump are flow controlled through the use of a choke valve. This is method of control is inherently inefficient for two reasons. 1) The AC pump purchased must often be over-powered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.
When used with the ReefLink, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
Footprint
3.8 in. x 6.5 in. (98.4mm x 165.4mm)
Flow
Flow: 2000 gph (7,500 lph)
Max Head Pressure: 21.5 feet (6.5 m)
Input/Output
Input: 1 inches (25 mm)
Output: .75 inches (19 mm)
Power
Wattage: 72 watts
M2 ModelFootprint
4.5 in. x 7.5 in. (113.5mm x 192.6mm)
Flow
Flow: 2000 gph (7,500 lph)
Max Head Pressure: 21.5 feet (6.5 m)
Input/Output
Input: 1.25 inches (31.75 mm)
Output: 1 inches (25 mm)
Power
Wattage: 96 watts
L2 Model
Footprint
5 in. x 8.5 in. (126.8mm x 215.15mm)
Flow
Flow: 3100 gph (11,500 lph)
Max Head Pressure: 21.5 feet (6.5 m)
Input/Output
Input: 1.5 inches (38mm)
Output: 1.25 inches (31.75 mm)
Power
Wattage: 150 watts
$ 299.99
QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.
First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.
Technical Features
![]() Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. |
![]() Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals. |
G![]() Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours. |
![]() Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds. |
![]() Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle. |
![]() Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS. |
![]() At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration. |
![]() Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours. |
![]() All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes. |
![]() All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine. |
![]() Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory. |
$ 366.50
QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.
First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.
Technical Features
![]() Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. |
![]() Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals. |
G![]() Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours. |
![]() Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds. |
![]() Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle. |
![]() Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS. |
![]() At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration. |
![]() Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours. |
![]() All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes. |
![]() All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine. |
![]() Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory. |
$ 699.99
QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.
First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.
![]() Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. |
![]() Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals. |
G![]() Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours. |
![]() Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds. |
![]() Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle. |
![]() Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS. |
![]() At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration. |
![]() Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours. |
![]() All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes. |
![]() All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine. |
![]() Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory. |
Sold Out - $ 62.00
EcoTech Wet-side assembly for VorTech MP10, MP40, and MP60 propeller pumps.
$ 34.89
Hydor Koralia Evolution Circulation Pump:
Finally a compact, energy saving controllable pump with amazing, never before seen performance! Even the exclusive magnet suction-cup support has been improved with vibration reduction technology. Find the model that best suits your needs, position it, plug it into a timer or directly into your electrical supply and watch your aquarium benefit from the powerful yet gentle flow.
Download manufacturer instructions .PDF
Model | Watts | Dimensions |
Evolution 600 | 5 | 3 1/2" x 6" |
Evolution 850 | 5 | 5 1/2" x 2 1/2" |
Evolution 1150 | 6 | 6" x 6" |
Evolution 1500 | 49 | 5.0" x 3.8" x 4.2" |
Model | Flow Rate | Fresh water | Salt water |
Evolution 600 | 600åÊgph | 40-80 gallons | 24-45 gallons |
Evolution 850 | 850åÊgph | 50-100 gallons | 30-55 gallons |
Evolution 1150 | 1150åÊgph | 70-140 gallons | 45-80 gallons |
Evolution 1500 | 1500åÊgph | 90-175 gallons | 55-100 gallons |
$ 32.99
Compact, energy saving, this Hydor Koralia Nano Evolution Circulation Pump is ideal to recreate in aquarium the natural and beneficial water motion of rivers and seas. Supplied with patented magnet-suction cup support for easy and safe positioning, Koralia can be connected to a controller and set to intervals of seconds, minutes or hours. Cable protector include (read instructions for correct positioning).
Are the Koralia Nanos safe for use on wavemakers?
Yes. Like the Koralia Evolutions and Magnums, the Koralia Nano 240 and 425 are designed to handle operation on wavemakers and timers.
Is it normal to hear a click when the Koralia Evolution starts-up?
Yes. You may hear a slight clicking sound when the Koralia Evolution starts-up. This is caused by the impeller resetting itself by hitting the rubber bumper on the inside of the front cover. Removal of the bumper will prevent this noise but, without the bumper the Koralia Evolution can run in reverse.
Download manufacturer instructions .PDF
Model | Watts | Flow Rate | Fresh water | Salt water |
Koralia Nano 240 | 3.5 | 240 gph | 16 - 18 gal | 10 - 15 gal |
Koralia Nano 425 | 3.5 | 425 gph | 28 - 50 gal | 15 - 30 gal |
$ 69.95
Smartwave is the new controller for movement and circulation pumps designed by Hydor. In nature, river and sea currents are a vital part of the natural life cycle of aquatic creatures as they promote oxygenation, transport nutrients and food and remove residues that would otherwise pollute.
Hydor Koralia Smart Wave Pump Controller helps recreate these currents which allow a healthy aquarium and uniform water temperature by selecting one of the 2 available programs:
Details:
Download the manufacturer instructions .PDF
$ 71.99
Hydor Koralia Third Generation Powerheads:
Koralia 3rd Generation is the new innovative and unique range of circulation and wave pumps, designed especially to work in reef aquariums. Higher performances, lower energy consumption and quick and easy maintenance are the main features of the Koralia 3rd Generation series. The new exclusive Hydor design and technology guarantees a smooth start, continuous and powerful water flow, and can be further managed using the three special attachments and Dual Magnet Support System (DMSS).
1350 GPH
5.5 watts
4-3/8" X 3" X 3"
1950 GPH
6.3 watts
4-3/8" X 3" X 3"
2450 GPH
9.5 watts
4-3/8" X 3" X 3"
$ 14.99
Maxi-Jet® multi-use water pumps are three pumps in one: power head, utility pump, and now featuring a circulation pump option. Still the best power head for powering undergravel filters and running wave maker timers, as well as for running small fountains, calcium reactors and skimmers.
New to the Maxi-Jet, the in-box conversion kit, which can turn the power head into a prop style circulation pump for ultimate water movement inside the aquarium--using the least amount of energy! The Maxi-Jet is the most fully adaptable pump available.
Download the manufacturer instructions .PDF
$ 329.00
Reeflos' Snapper/Dart Hybrid Water Pumps were developed in response to the need for quiet, low watt draw pumps that serve the high pressure requirements of 75-150 gallon aquarium tanks. Great for use as return pumps, or for closed loop systems.
The Snapper/Dart Hybrid has the added bonus of coming with a Dart conversion kit (aka 3600)...so it can be operated either as a Snapper or Dart!
Features
Model | Watts | Inlet / Outlet Size |
Snapper / Dart Hybrid | 94 / 165 | 2” FPT inlet / 1.5” FPT outlet |
Super Dart / Snapper Gold Hybrid | 147 | 2" FPT inlet / 1.5" FPT outlet |
Barracuda / Hammerhead Hybrid | 237 / 337 | 1.5” FPT inlet / outlet |
Hammerhead / Barracuda Gold Hybrid | 237 / 372 | 1.5” FPT inlet / outlet |
Model | Max Flow | Max Head |
Snapper / Dart Hybrid | 2600 / 3600 gph | 12 ft. |
Super Dart / Snapper Gold Hybrid | 2400 / 4300 gph | 14 ft. |
Barracuda / Hammerhead Hybrid | 4590 / 6000 gph | 23 ft. |
Hammerhead / Barracuda Gold Hybrid | 4300 / 6000 gph | 24 ft. |
$ 399.99
The GOLD difference
Certain customers have put together complex systems that demand the highest level of efficiency, quiet operation and durability. For these customers we have created the ReeFlo GOLD pump line. The difference is the motors which run at higher efficiencies. This results in cooler, quieter operation in addition to lower power consumption and longer life.
Features:
Model | Watts | Inlet / Outlet Size |
Snapper / Dart Hybrid | 94 / 165 | 2” FPT inlet / 1.5” FPT outlet |
Super Dart / Snapper Gold Hybrid | 147 | 2" FPT inlet / 1.5" FPT outlet |
Barracuda / Hammerhead Hybrid | 237 / 337 | 1.5” FPT inlet / outlet |
Hammerhead / Barracuda Gold Hybrid | 237 / 372 | 1.5” FPT inlet / outlet |
Model | Max Flow | Max Head |
Snapper / Dart Hybrid | 2600 / 3600 gph | 12 ft. |
Super Dart/Snapper Gold Hybrid | 2400/4300 gph | 14 ft. |
Barracuda / Hammerhead Hybrid | 4590 / 6000 gph | 23 ft. |
Hammerhead / Barracuda Gold Hybrid | 4300 / 6000 gph | 24 ft. |
$ 41.89
The Syncra Silent is new range of energy efficient pumps that is absolutely silent. Don't be fooled - these pumps are powerful and versatile. Ideal for fresh and salt water aquariums, protein skimmers, indoor fountains, water-cooling and all submersible and in-line applications which require high performance and total silence. Thanks to Sicce's 35 years of experience, Syncra Silent are equipped with a synchronous motor and an advanced rotor which makes the pumps 100% silent.
Features:
$ 40.89
Its main feature is an innovative 360 degree rotation system, directing water flow thanks to 4 types of regulation:
1) of the flow rate
2) of the flow direction
3) of the speed of the rotation of the deflector
4) and a 360 degree rotation of the pump support.
All of these allow the the Voyager to perfectly simulate the marine streams! The Voyager can be used in fresh water aquariums. In fact, thanks to innovative flow deviator and rotation system, it is useful to raise the deposits from the bottom of the tank, for better filtration, contributing to cleaner and clearer water.
The Sicce Voyager Stream Pump is furnished with 4 suction cups.
Magnets, for a greater adherence to the glass (up to 3/4" thickness), are optional on the Voyager 1. The exclusive magnetic support, standard for the Voyager 2, 3, and 4 is long-lasting and reliable and is ideal for glasses of 3/4" thick.
The Voyager can be used in fresh water aquariums. In fact, it can be used to raise the deposits from the bottom of the tank for better filtration, contributing to cleaner and clearer water. Maximum inclination, flexibility, silence & reliability - all in one unit!
Features:
‰ۢ CE & UL listed
‰ۢ 360 degree pump rotation
‰ۢ Oscellating pump body
‰ۢ Support w/ magnets and suction cups
‰ۢ Adjustable deflector
‰ۢ Water capacity regulator
Model # | Watts | Flow Rate |
Voyager 1 | 8 | 265 - 607 gph |
Voyager 2 | 7 | 800 gph |
Voyager 3 | 10 | 1200 gph |
Voyager 4 | 14 | 1600 gph |
$ 36.69
Eco-Energetic
The innovative motor based on the eco-energetic concept and the newly developed pump technology ensures a very high efficiency at very low maintenance and power consumption.
Very Silent Run
Special plastic bearings, a New Generation with Titanium Alloy Shaft, and silicone absorbers enable a very silent run without wear which applies for smaller models as well as for the more powerful pumps.
Large Suction Area
The water which is drawn in passed through a giant intake strainer, and thus prevents premature soiling.
Magnet Holder - A Standard Feature
As a standard feature, Turbelle stream is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.
Flexible adaptation
The ball-type design is an intelligent solution for installation with a minimum of hydraulic losses. Contrary to other pumps, they offer a lot of flexibility with respect to positioning and orientation of the water beam, which can be adjusted in such a way that an effective flow is produced over a long distance in the aquarium at lower power consumption.
Energy efficient
Eco-energetic and extremely silent Hardly any other components have experienced similar progress in aquarium engineering in the past few years as the circulation pump. The new Turbelle® stream 2 is a very compact screw pump with a wellthought- out design used to circulate water in aquariums or tanks. It contains several innovative technical solutions and adapts to the aquarium without affecting the existing biotope.
Models 6025, 6045, 6065, 6085, & 6125 are not controllable.
Model # | Watts | Dimensions |
NanoStream 6015 | 6 | Diameter 2.7"/ Outlet 1.5" |
NanoStream 6025 | 6 | Diameter 2.7"/ Outlet 1.5" |
NanoStream 6045 | 7 | Diameter 2.7"/ Outlet 1.5" |
Turbelle Stream 6065 | 12 | Diameter 3.5"/ Outlet 1.96" |
Turbelle Stream 6085 | 14 | Diameter 3.5"/ Outlet 1.96" |
Turbelle Stream 6125 | 24 | Diameter 3.5"/ Outlet 2.48" |
Model # | Flow rate | Tank size |
NanoStream 6015 | 475 gph | 5 - 30 gal |
NanoStream 6025 | 660 gph | 10 - 50 gal |
NanoStream 6045 | 1189 gph | 25 - 50 gal |
Turbelle Stream 6065 | 1717 gph | 65 - 200 gal |
Turbelle Stream 6085 | 2113 gph | 105 - 260 gal |
Turbelle Stream 6125 | 3170 gph | 105 - 500 gal |