Plumbing Parts
No sales gimmicks. Low prices every day. Compare us to Petco and Amazon.
3/4" thread to barb fitting
$ 2.49
- Male thread screws into 3/4" female thread, either a bulkhead or PVC fitting.
- 3/4" barb accepts 3/4" clear tubing- make sure to clamp this connection.
View full product details »
Ball Valves slip to slip
$ 9.99
- Use with PVC pipe, or glue an MTP slip to barb fitting in each end and use with clear tubing.
- Ball valves allow you to easily adjust the flow through the pipe, and to shut off pipes when needed, to make maintenance easier.
View full product details »
Bulkheads slip to thread
$ 4.99
- Use bulkheads to connect piping through the side of an aquarium or sump.
- The outside is a slip fitting, which can be connected with PVC glue.
- The inside (flange side) is a female threaded fitting which you can screw a male threaded fitting into.
- Includes rubber gasket, which goes on the inside between the bulkhead flange and the aquarium or sump.
- Tighten the nut on the outside of the bulkhead by hand and then 1-2 turns with a wrench - Do not over tighten.
View full product details »
Clear Tubing by the foot
$ 1.49
- Great for use in plumbing all sorts of aquarium applications
- Use it to connect return pumps to the aquarium, and to connect U.V. sterilizers, chillers, etc.
- Make sure to clamp all connections.
View full product details »
Clear Union Check Valves slip to slip
$ 17.99
- Unfortunately many aquariums do not have these, although they should.
- Check valves allow water to flow freely in one direction, but have a flap that closes to prevent water from flowing backwards.
- Many aquariums have return lines several inches underwater.
- If the power shuts off, and there are no check valves on submerged return lines, water will siphon from the aquarium down to the level of the return line, often flooding the sump.
- Use a check valve on each return line to prevent excess water from siphoning out of your aquarium if the power should shut off.
- Use with PVC pipe, or glue an MTP slip to barb fitting in each end and use with clear tubing.
View full product details »
Drain Screens
$ 1.99
Screw these male threaded drain screens into a female threaded bulkhead to prevent fish from going down the drain.
View full product details »
Loc-Line Flare Nozzles
$ 3.49
- Connect to the end of Lockline to create a nice flow in the aquarium.
- Use the wide flare to create a spread out current, or the narrow flare to create a stronger, more directed current.
View full product details »
Loc-Line Modular Hose Segments
$ 4.29
- An aquarium standard
- Great for use in constructing a wide variety of return jets inside the aquarium.
- 6 segment lengths are available in 1/2" or 3/4" sizes.
- Bend it to the shape you want it and it will hold that shape.
- You can Y it easily to create flow in multiple directions.
View full product details »
Loc-Line NPT Threaded Connector
$ 1.59
- Available in 1/2" or 3/4" male threads.
- Screw the male threads into a female threaded bulkhead to connect Loc-Line to the bulkhead.
View full product details »
Loc-Line Y Fitting
$ 3.89
- Allows you to Y a Loc-Line return line.
- Available in 1/2", 3/4", or as a Y reducer that converts 3/4" Loc-Line into two 1/2" Loc-Lines.
View full product details »
Plastic Hose Clamps
$ 1.49
- Great for use in or out of water since they will not rust.
- Use pliers to clamp them tight
- Easily re-usable. Just use pliers to twist them open.
- Great for clamping clear tubing over barbed fittings
View full product details »
Return Jet
$ 6.99
- Hang over the back of the aquarium and use 3/4" clear tubing to connect it to your return pump - make sure to clamp all connections.
- Adjustable nozzle makes it easy to direct to flow as needed.
View full product details »
Slip to barb MTP fitting
$ 2.49
- Slip end will fit inside a 3/4" PVC coupling, elbow, ball valve, or check valve, or will fit outside 1/2" PVC pipe.
- Use PVC glue to connect the slip end of this fitting.
- 3/4" barb accepts 3/4" clear tubing- make sure to clamp this connection.
View full product details »
Spectrapure Auto Shut-Off Float Valve Kit
$ 47.99
SpectraPure Auto Shut Off Valve Float Kit for RO System
- Positive shut-off - completely shuts off waste & product water once reservoir is full
- Economical
Note: The Auto Shut-Off Float Kit is not recommended for evaporation replacement in aquariums. The Single Tank Liquid Replenisher
View full product details »