In-Tank Circulation Pumps

EcoTech VorTech MP10w QD Propeller Pump with Wireless QuietDrive Driver

$ 299.99

• Create massive water movement
• Natural Gyre
• Three dimensional flow patterns
• Comprehensive flow options
• Precise water movement control

• No distractions from the beauty of the tank and its inhabitants
• No wires in the aquarium
• No unwanted heat added to the water column
• No risk of electrical discharge harming people or marine life
• No hassle when it comes to installing, relocating or cleaning the powerhead

QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.

First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.

specs

• Flow: 1,500+ gph
• Power Consumption: 8 to 18 Watts
• Tank Range: 2.5-50+ gallons
• Max Glass Thickness: 0.375"
• Dryside Dimensions: 2.5" Diameter, 2" Height
• Wetside Dimensions: 2.5" Diameter, 1.5" Height
• Clearance Needed Behind Aquarium: 2.25"

Technical Features

• All new driver
• More than 6 continuous operation modes
• Wave Auto Tune, Feed Mode & Night Mode
• Reduced motor noise compared to older MP10wES.
• Higher output
• Communicates with existing WWD and "W" EcoSmart Pumps
• Fully compatible with EcoSmart Live via optional ReefLink

modes

LAGOON MODE Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon.

REEF CREST MODE Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals.

GYRE MODE Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours.

SHORT PULSE MODE Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds.

TIDAL SWELL MODE Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle.

NUTRIENT TRANSPORT MODE Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS.

FEED MODE At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.

NIGHT MODE Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours.

MULTI-PUMP COMMUNICATION All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes.

ESL VIA A MOBILE DEVICE (ReefLink and internet connection required) All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine.

BATTERY BACKUP MODE (EcoTech Battery Back-Up required) Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory.

View full product details »

EcoTech VorTech MP40w QD Propeller Pump with Wireless QuietDrive Driver

$ 366.50

• Create massive water movement
• Natural Gyre
• Three dimensional flow patterns
• Comprehensive flow options
• Precise water movement control

• No distractions from the beauty of the tank and its inhabitants
• No wires in the aquarium
• No unwanted heat added to the water column
• No risk of electrical discharge harming people or marine life
• No hassle when it comes to installing, relocating or cleaning the powerhead

QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.

First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.

specs

Technical Features

• All new driver
• More than 6 continuous operation modes
• Wave Auto Tune, Feed Mode & Night Mode
• 90% less motor noise compared to older MP40wES.
• Up to 40% more output
• Communicates with existing WWD and "W" EcoSmart Pumps
• Fully compatible with EcoSmart Live via optional ReefLink

• Flow: 4,500+ gph
• Power Consumption: 9 to 38 Watts
• Tank Range: 50-500+ gallons
• Max Glass Thickness: 0.75"
• Dryside Dimensions: 3" Diameter, 2.25" Height
• Wetside Dimensions: 3" Diameter, 3" Height
• Clearance Needed Behind Aquarium: 2.5"

modes

LAGOON MODE Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon.

REEF CREST MODE Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals.

GYRE MODE Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours.

SHORT PULSE MODE Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds.

TIDAL SWELL MODE Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle.

NUTRIENT TRANSPORT MODE Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS.

FEED MODE At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.

NIGHT MODE Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours.

MULTI-PUMP COMMUNICATION All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes.

ESL VIA A MOBILE DEVICE (ReefLink and internet connection required) All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine.

BATTERY BACKUP MODE (EcoTech Battery Back-Up required) Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory.

View full product details »

EcoTech VorTech MP60w QD Propeller Pump with Wireless QuietDrive Driver

$ 699.99

• Create massive water movement
• Natural Gyre
• Three dimensional flow patterns
• Comprehensive flow options
• Precise water movement control

• No distractions from the beauty of the tank and its inhabitants
• No wires in the aquarium
• No unwanted heat added to the water column
• No risk of electrical discharge harming people or marine life
• No hassle when it comes to installing, relocating or cleaning the powerhead

QuietDrive builds on the unique advantages of the VorTech`s magnetically couple design and takes it to the next level. The revolutionary new drive system boasts increased efficiency and significantly reduces motor noise.

First, VorTech took the pump motor out of the aquarium, now QuietDrive takes the noise out of the motor.

specs

• All new driver
• More than 6 continuous operation modes
• Wave Auto Tune, Feed Mode & Night Mode
• Less motor noise compared to older MP60wES
• Communicates with existing WWD and "W" EcoSmart Pumps
• Fully compatible with EcoSmart Live via optional ReefLink

• Flow: 7,500+ gph
• Power Consumption: 10 to 60 Watts
• Tank Range: 120-1,000+ gallons
• Max Glass Thickness Range: 0.375" - 1.00"
• Dryside Dimensions: 4" Diameter, 3" Height
• Wetside Dimensions: 4" Diameter, 2.8" Height
• Clearance Needed Behind Aquarium: 3.25"

modes

LAGOON MODE Lagoonal Random Mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon.

REEF CREST MODE Reef Crest Random Mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surge tide. This is a favorite of SPS Corals.

GYRE MODE Gyre Mode creates a flow pattern consisting of uniform clockwise and counterclockwise flow levels pulsing at a selected interval between two seconds and two hours.

SHORT PULSE MODE Short Pulse Mode creates a flow pattern consisting of uniform high and low flow levels pulsing at a selected interval between 0.2 seconds and two seconds.

TIDAL SWELL MODE Tidal Swell Mode (TSM) creates a harmonic balance reminiscent of the changing flow conditions found in nature. over the course of several hours, the flow pattern will go from very chaotic to calm, followed by a detritus-clearing surge at the very end of the cycle. The flow direction will change direction every cycle.

NUTRIENT TRANSPORT MODE Nutrient Transport Mode (NTM) creates circulation in a two-phase program. The first phase uses wave motion to stir up detritus. The second phase follows with a surging motion to move the detritus into the overflow and out of the aquarium. This mode promotes maximum health, nutrient export and increased growth for sensitive corals such as SPS.

FEED MODE At the touch of a button all VorTech wirelessly enabled pumps will temporarily pause their current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.

NIGHT MODE Pumps can be enabled to run a gentler night time program simulating calmer ocean conditions for the night time hours.

MULTI-PUMP COMMUNICATION All "w" denominated VorTech pumps come with an RF module installed. The RF module will allow up to 8 "w" pumps of any type to work together in sync, anti-sync or coordinated modes.

ESL VIA A MOBILE DEVICE (ReefLink and internet connection required) All "w" denominated VorTech pumps are compatible with ReefLink. ReefLink provides completely wireless access to the world of EcoSmartLive, the web-based aquarium command center from EcoTech Marine.

BATTERY BACKUP MODE (EcoTech Battery Back-Up required) Blizzard, hurricane, a downed utility pole; stuff happens. The power goes out... VorTech pumps are compatible with the EcoTech Battery Backup accessory.

View full product details »

EcoTech Wet-Side Assembly for Ecotech VorTech Pumps

Sold Out - $ 62.00

EcoTech Wet-side assembly for VorTech MP10, MP40, and MP60 propeller pumps.

View full product details »

Hydor Koralia Evolution Circulation Pump

$ 34.89

overview

Hydor Koralia Evolution Circulation Pump:

Finally a compact, energy saving controllable pump with amazing, never before seen performance! Even the exclusive magnet suction-cup support has been improved with vibration reduction technology. Find the model that best suits your needs, position it, plug it into a timer or directly into your electrical supply and watch your aquarium benefit from the powerful yet gentle flow.

Download manufacturer instructions .PDF

specs

flow chart

View full product details »

Hydor Koralia Nano Evolution Circulation Pump

$ 32.99

Compact, energy saving, this Hydor Koralia Nano Evolution Circulation Pump is ideal to recreate in aquarium the natural and beneficial water motion of rivers and seas. Supplied with patented magnet-suction cup support for easy and safe positioning, Koralia can be connected to a controller and set to intervals of seconds, minutes or hours. Cable protector include (read instructions for correct positioning).

Are the Koralia Nanos safe for use on wavemakers?

Yes. Like the Koralia Evolutions and Magnums, the Koralia Nano 240 and 425 are designed to handle operation on wavemakers and timers.

Is it normal to hear a click when the Koralia Evolution starts-up?

Yes. You may hear a slight clicking sound when the Koralia Evolution starts-up. This is caused by the impeller resetting itself by hitting the rubber bumper on the inside of the front cover. Removal of the bumper will prevent this noise but, without the bumper the Koralia Evolution can run in reverse.

Download manufacturer instructions .PDF

flow chart

View full product details »

Hydor Koralia Smart Wave Pump Controller

$ 69.95

Smartwave is the new controller for movement and circulation pumps designed by Hydor. In nature, river and sea currents are a vital part of the natural life cycle of aquatic creatures as they promote oxygenation, transport nutrients and food and remove residues that would otherwise pollute.

Hydor Koralia Smart Wave Pump Controller helps recreate these currents which allow a healthy aquarium and uniform water temperature by selecting one of the 2 available programs:

• Alternate: pump 1 ON - pump 2 OFF, pump 1 OFF - pump 2 ON.
• Synchronous: pump 1 and 2 go ON and OFF together.

Details:

• 2 outlets, both for up to 100W; Unit is UL approved and water resistant.
• 2 selection knobs, 1 for pump program (alternate-synchronous), 1 for time interval setting (second, minutes, hours)
• Feeding program. Compact, Smartwave is easy to conceal by hanging it inside the aquarium cabinet. Designed for Koralia's, Smartwave works with most movement pumps available on the market compatible with quick ON-OFF (5 seconds= 6.3 million on/off per year)

Download the manufacturer instructions .PDF

View full product details »

IceCap 3K Gyre Generator Flow Pump

Sold Out - $ 149.99

Crossflow Water Movement

Similar to the Maxspect Gyre flow pump, the IceCap 3K is capable of generating the iconic GYRE water movement within aquariums without breaking the bank. Single magnetic mount makes the pump simple to install. 5 Controllable flow modes and programable 24hr flow period. 

Crossflow Technology 

• Virtually no dead spots
• Evenly distributed flow rate throughout the entire aquarium
• Water bounces back from the other side to create a full circulation, ie. generating "gyre flows"

Standard Propeller Nozzle Technology

• Dead spots with relatively poor water movement
• Very strong flow in the center, making coral placement very difficult
• Very weak flow near the other end of the aquarium

Why Gyre Generator and not Wavemaker?

Wavemakers excel in making waves, while waves are spectacular to watch in motion, they are in fact moving the majority of the water vertically up and down, with relatively low horizontal movement, especially near the bottom of the aquarium.

On the other hand, gyre generators excel in moving sheer flow of water from one side of the aquarium to the other. The sheer flow of water is so strong that i would bounce back from the opposite site to achieve full circulation within an aquarium, ie. generating "gyre flows".

Features

• Revolutionary Crossflow Technology
• Discrete design
• Virtually No Dead spots
• Evenly Distributed Flow
• Gyre Generating Flows
• Controller with Mountable Craddle
• Waterproof Mounting Magnet

specs

IceCap 3K Pump Specifications

• Dimensions (LxWxH): 12.2in x 3.1in x 1.7in
• Flow Rate: ~3000gph
• Power Consumption: 40w-8w
• Ideal for Aquariums: 25 -100gal

Contents

• IceCap 3K Pump with Magnet Mount
• Controller with mount
• Power Supply
• Operation Instructions.

Power Supply Unit

• 100-240V / 50-60Hz 1.5A
• Weight: 2.16lbs
• Cable Length: 6.5ft (controller to pump), 5ft (power supply to controller)

*Specifications are subject to change without notice. Weight and dimensions are approximate.

View full product details »

Marineland Maxi-Jet Aquarium Power Heads

$ 14.99

Maxi-Jet® multi-use water pumps are three pumps in one: power head, utility pump, and now featuring a circulation pump option. Still the best power head for powering undergravel filters and running wave maker timers, as well as for running small fountains, calcium reactors and skimmers.

New to the Maxi-Jet, the in-box conversion kit, which can turn the power head into a prop style circulation pump for ultimate water movement inside the aquarium--using the least amount of energy! The Maxi-Jet is the most fully adaptable pump available.

Download the manufacturer instructions .PDF

flow chart

View full product details »

Sicce Voyager HP Water Pumps

$ 142.99

The New Sicce Voyager HP or High Performance series builds upon all of the same great features and technology of the models 1 through 4 but takes them to another level.

Features:

• ETL and cETL listed
• 360 degree pump rotation
• Support w/ magnets
• Adjustable angle deflector
• Quiet operation
• Safe for use with timers
• Can be turned on and off quickly without harm or noise
• Latest in prop rotor technology
• Microfine direction adjustment with locking fasteners

The models range from 2800 to 4000 gallons per hour and have innovations that leave them in a class by themselves.

Thanks to the exclusive magnetic support, the Voyagers can be positioned anywhere: on the sides, behind the tank, and around the aquarium's corners. The support system permits them to reach up to 180 degrees vertically and 360 degrees circulatory has endless orientation possibilities. This unique feature allows the units to be mounted on the rear glass of the aquarium without sacrificing its directional range.

The Voyager's versatility in movement and positioning makes it possible to hide them anywhere, assuring optimal performance. The removable front ring insert allows you to regulate the water flow wide or narrow, satisfying even the most particular species needs.

The units have the most durable rotor, ceramic seats, and a ceramic shaft. This, combined with the electronic engineering of the motor, assures that the pump always starts in the correct direction without vibration or noise. The rotor and shaft of the Voyager are wear-resistant beyond compare!

Mounting does not rely on suction cups or a combination of suction with magnets because in a salt water tank or in hard water they become stiff with time, compromising their hold, and causing the pump to become unstable.

The exclusive magnetic support for the Voyager is long-lasting, reliable, ideal for glass up to 3/4" thick and prevents slippage, vibration, and wear on the glass.

The Voyager can be used in fresh water and saltwater aquariums. Maximum inclination, flexibility, silence, and reliability - all in one unit!

specs

View full product details »

Sicce Voyager Stream Pumps

$ 40.89

Its main feature is an innovative 360 degree rotation system, directing water flow thanks to 4 types of regulation:

1) of the flow rate

2) of the flow direction

3) of the speed of the rotation of the deflector

4) and a 360 degree rotation of the pump support.

All of these allow the the Voyager to perfectly simulate the marine streams! The Voyager can be used in fresh water aquariums. In fact, thanks to innovative flow deviator and rotation system, it is useful to raise the deposits from the bottom of the tank, for better filtration, contributing to cleaner and clearer water.

The Sicce Voyager Stream Pump is furnished with 4 suction cups.

Magnets, for a greater adherence to the glass (up to 3/4" thickness), are optional on the Voyager 1. The exclusive magnetic support, standard for the Voyager 2, 3, and 4 is long-lasting and reliable and is ideal for glasses of 3/4" thick.

The Voyager can be used in fresh water aquariums. In fact, it can be used to raise the deposits from the bottom of the tank for better filtration, contributing to cleaner and clearer water. Maximum inclination, flexibility, silence & reliability - all in one unit!

Features:
‰ۢ CE & UL listed
‰ۢ 360 degree pump rotation
‰ۢ Oscellating pump body
‰ۢ Support w/ magnets and suction cups
‰ۢ Adjustable deflector
‰ۢ Water capacity regulator

specs

View full product details »

Sicce Xstream Series Pumps

$ 116.99

The SICCE XSTREAM series pump, the latest generation of stream pumps for saltwater and freshwarter aquariums. XSTREAM, designed and made in Italy to rigorous quality standards on components and production, is a technically advanced pump for high performance, long lasting reliability, low operating costs and user-friendly maintenance. The pump's rotating engine allows for a wide adjustable flow up to 360. The strong magnet holders guarantee secure holding even on dirty glass. The XSTREAM-e with Electronic Mini-Controller and pre-set timing programs with flow control, will satisfy the expectations of the most demanding customer.

The XSTREAM line is the perfect combinationof quiet operation, small size, high performance, quality components, and low running costs.

Dimensions: 2.08 X 2.75 X 2.44

Features:

• ETL and cETL listed
• Manufactured with the highest quality, individually tested materials
• Strong support magnets
• Compact - Leading performance ratio to size
• SICCE Sound Absorbing System to minimize noise and vibration
• Rotating, magnetic mount is easily positioned anywhere in aquarium 360å¡ directional flow adjustable
• Energy saving for its cool operation and minimal operating cost
• Pure ceramic bearings minimize noise and extend life
• Pre-lubricated, self-cleaning impeller
• Silicone cord protection
• Cord length 7.2ft
• 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer

specs

View full product details »

Tunze Multicontroller 7095

$ 269.99

Main Features

• Wave simulation function
• Tidal current control
• Night mode operation including photoelectric cell
• Sequential pump circuit
• Random flow
• Foodtimer
• Control up to 4 of the controllable Tunze Nanostream or Stream 2 powerheads individually.
• Use a Y adapter (7092.34) to control up to 8 controllable Tunze powerheads in pairs.

• Waterproof membrane keypad on new housing
• LED moonlight with 29-day moon phase including universal mount
• Display of the capacity of the pump connected

Tunze Multicontroller 7095 is a digital control unit for all controllable Tunze Nanostream and Stream powerheads. It allows you to simulate various marine current conditions in the aquarium. Multicontroller 7095 can control up to eight controllable Tunze powerheads, and contains an LED moonlight with a 29-day moon phase. A wavebox 6212 can also be controlled by the Multicontroller. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 percent.

Includes four connecting cables 7092.30 and a photo-electric cell, permitting a near-natural current control with up to four Tunze controllable powerheads. Use the Y adapter 7092.34 (purchased separately) to connect up to eight Tunze controllable powerheads which are controlled in pairs. Two interval functions for tidal current control with alternating on/off switch function of the pumps or alternating operation of pump capacity.

Download the manufacturer instructions .PDF

View full product details »

Tunze Multicontroller 7096

$ 168.99

TUNZE® Multicontroller 7096 is a control device for all Turbelle® and Stream® pumps fitted with an electronic motor, which can be adjusted by computer when attached by USB cable.

It features a 8-Bit high-performance microprocessor with memory maintaining the settings in the case of a power failure. When selecting the settings on the controller from a computer, the Multicontroller does not have to be connected to the pumps. Upon completion and saving of the set-up on the computer, the data will also be saved in the Multicontroller.

The TUNZE® Multicontroller 7096 features the functions of Multicontroller 7095 and Wavecontroller 7092 as well as some new control options. It simulates the different ocean current conditions in the aquarium and features a bright LED moonlight.

Includes:
7096 Multicontroller with photo-electric cell, moonlight, and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. Suitable for MS-Windows 98, 2000, XP and Vista.

Download the manufacturer instructions .PDF

modes

Pulse Mode Wave Simulation:
Set maximum and minimum velocities as well as pulse duration. Creates natural alternating currents ideal for smaller aquariums with only one controllable pump. Two pumps can be set to pulse together or in inverse mode.

Interval Mode Tide Simulation:
Generally best mode for two pumps on opposite sides of the aquarium. As one pump pulses between two set powers, other stays on low speed. The pumps then swap roles based on setting, from minutes up to hours. Also useful for creating gyro currents.

Sequential Mode Surges and Swelling Currents:
Used with three or more pumps, generally in larger tanks. Pumps are triggered cumulatively. Pump one begins, then Pump two is added to that, then Pump three is added together with One and Two and so forth. Timings set by user.

Random Flow
Combination of Pulse Mode and Sequential Mode.

Oscillating Mode
Pump channels can be used as Wave Controller with automatic search of resonance frequency. Oscillating mode switches between Pulse Mode pumps and Waveboxes.

Food Timer
Allow all pups to be stopped at the push of button. Pumps restarts automatically after a period of roughly ten minutes (or adjustable time period on 7096). During food timer operation, all pumps twitch periodically to keep small fish from entering pumps.

Moonlight with Moon Phase Simulation
Natural, soft white moonlight with 29-Day cycle of waxing and waning. Can be synchronized with actual moon phases.

Night Mode Operation
Option to have pumps and Waveboxes run at lowest speed automatically whenever main aquarium lights are off. Triggered by photocell built into moonlight.

Storm Desedimentation
Can be set to run at intervals of hours to days. Runs pumps in short, aggressive mode to stir any settled detritus.

View full product details »

Tunze Turbelle NanoStream (non-controllable)

$ 38.99

Non-controllable synchronous motor pumps.

specs

View full product details »

Tunze Turbelle Stream 2 Powerhead

$ 36.69

Eco-Energetic
The innovative motor based on the eco-energetic concept and the newly developed pump technology ensures a very high efficiency at very low maintenance and power consumption.

Very Silent Run
Special plastic bearings, a New Generation with Titanium Alloy Shaft, and silicone absorbers enable a very silent run without wear which applies for smaller models as well as for the more powerful pumps.

Large Suction Area
The water which is drawn in passed through a giant intake strainer, and thus prevents premature soiling.

Magnet Holder - A Standard Feature
As a standard feature, Turbelle stream is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.

• NanoStream 6025 & 6045 pumps include a magnet holder for aquariums up to 1/2" thick.
• Turbelle Stream models 6065, 6085, & 6125 include a magnet holder for aquariums up to 3/4" thick.

Flexible adaptation
The ball-type design is an intelligent solution for installation with a minimum of hydraulic losses. Contrary to other pumps, they offer a lot of flexibility with respect to positioning and orientation of the water beam, which can be adjusted in such a way that an effective flow is produced over a long distance in the aquarium at lower power consumption.

Energy efficient
Eco-energetic and extremely silent Hardly any other components have experienced similar progress in aquarium engineering in the past few years as the circulation pump. The new Turbelle® stream 2 is a very compact screw pump with a wellthought- out design used to circulate water in aquariums or tanks. It contains several innovative technical solutions and adapts to the aquarium without affecting the existing biotope.

Models 6025, 6045, 6065, 6085, & 6125 are not controllable.

specs

flow chart

View full product details »

Tunze Wavecontroller 7092

$ 76.49

Wavecontroller 7092 fitted with a membrane terminal is a control unit to be used on all Turbelle® pumps with electronic motor, and can synchronously or alternately control two Turbelle® pumps:

• Wave simulation by setting the two pump outputs to maximum and minimum values as well as the pulse time.
• Oscillating flow for the direct or reciprocal operation of the Wavebox.
• Oscillating flow with Turbelle® pump for the operation of Turbelle® stream pumps.
• Automatic search of the resonance frequency in case of oscillating flow.
• Ramp function for a gentle start of the pumps.
• Foodtimer at the touch of a button; after about eight to ten minutes, a restart is carried out automatically. If the Photo-Electric Cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.

View full product details »