No sales gimmicks. Low prices every day. Compare us to Petco and Amazon.
State of the art filter media for use in fresh and salt water wet/dry systems.They may be connected together or randomly placed in the filter box. Bio-Pin Balls help produce turbulence, aiding in the gas-exchange process. The suggested usage is 1 gallon of Bio-Pin Balls per 20 gallons for salt water or 35 gallons freshwater. Size Large. Each Bio-Pin Ball has 150 Bio-pins(drip points). There are 74 Balls per gallon, one cu ft. of media has approximately 150 sq ft of surface area.
CLEAR FX PRO is the most advanced all-in-one filtration media available on the market. Our cutting edge technology is compatible with both fresh and saltwater aquariums of all sizes. The easy to use media is the most comprehensive and reliable solution for aquarists of all skill levels.
The proprietary blend combines a super carbon, hybrid phosphate resin and organic scavenger resin. CLEAR FX PRO works rapidly to remove organic pollutants while leaving behind essential trace elements effectively keeping aquariums clean, clear and healthy for months.
To use the product simply place the mesh filter bag within a high flow area of your filtration system. The media is compatible within both canister filters and standard sumps.
Granular Activated Carbon (GAC):
CLEAR FX PRO contains a coal based granular activated carbon (GAC). The product offers the hardest carbon available that will still work when used in water. The high surface area and durability of our unique carbon allows CLEAR FX PRO to last longer and prevent deterioration over time. Unlike other carbon based filtration medias, the extremely low ash content of CLEAR FX PRO will not lead to hole in the head or lateral line disease within your aquarium.
Hybrid Phosphate Removing Resin:
CLEAR FX PRO introduces a new and exciting technology to the phosphate removal process. Unlike competing medias, CLEAR FX PRO uses a hybrid resin that works more effectively than Granular Ferric Oxide (GFO) phosphate removers. The resin’s spherical beaded structure will not clump or clog. The long lasting, high capacity resin absorbs phosphates in half the time as a standard GFO and will not release phosphates back into the water after reaching maximum capacity.
Organic Scavenger Resin
The scavenger resin in CLEAR FX PRO attracts your tanks organics, effectively controlling ammonia, nitrate and nitrite levels. The organic scavenger resin has a macro-porous design that will not clog as quickly as competing organic removers. The resin works hand-in-hand with our GAC to deliver clarity, stability and health to your aquarium water.
|Comparing Seachem Phosphate Removers|
|PhosGuard (Alumina Oxide)||0.87 mg/g|
|PhosBond (GFO and Alumina Oxide hybrid)||1.19 mg/g|
|PhosNet (GFO)||1.41 mg/g|
PhosBond™ is a revolutionary new product that combines the phosphate removing capabilities of both aluminum oxide and granular ferric oxide into a singular material forming a synergistic effect. It rapidly removes phosphates and silicates from saltwater and freshwater, combining the best of both types of phosphate removers. Its high porosity and surface area give it a large binding capacity, while its physical strength and integrity assures that it will not break down from mechanical stress.
For best results, PhosBond™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as The Bag is recommended.
Use 60 mL (1/4 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™ Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosBond™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosBond™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
100 mL, 250 mL, 500 mL, 1 L, 4 L